PSI to Inches of Water

PSI to Inches of Water

psi
00.11101001000 psi
inH₂O
Water reference temp
Decimals

1 psi = 27.6807 inH₂O

Live visual

linked to result
U-tube manometer showing the water column heightP1 psiopen · atmhin
U-tube manometer · h = 27.68 in
Pressure gauge in psi1.00psi
Column height2.31 ft0.703 m of water
How tall is that?2.31 ft ≈ 0.92× the height of a desk
0.1 in1 in1 ft10 ft100 ft1000 ft

How PSI to Inches of Water Calculator Works?

The PSI to Inches of Water calculator works in 4 steps: it reads the pressure in pounds per square inch (psi), converts the pressure to pascals (Pa), divides by the pascal value of 1 inch of water column (inH₂O), and draws the result.

  1. Read the input1 psiPounds per square inch, gauge or differential
  2. Convert to pascals× 6,894.757 = 6,894.757 Pa1 psi = 6,894.757293 Pa (exact)
  3. Divide by 1 inH₂O÷ 249.082 = 27.6807 inH₂OWater at 39.2 °F (4 °C), per NIST SP 811
  4. Draw the result2.31 ft · 0.703 mU-tube manometer, gauge and height scale

3 water reference temperatures

The calculator offers 3 water reference temperatures:

  • 39.2 °F (4 °C): 1 psi = 27.6807 inH₂O. Water is densest at 4 °C, so the National Institute of Standards and Technology (NIST) uses this value.
  • 60 °F (15.6 °C): 1 psi = 27.7076 inH₂O. Gas utilities and HVAC manuals use this value.
  • 68 °F (20 °C): 1 psi = 27.7299 inH₂O. Laboratories and European instruments use this value.

11 outputs from 1 input

Every psi value returns 11 results: inches of water, feet of water (ftH₂O), centimetres of water (cmH₂O), millimetres of water (mmH₂O), kilopascals (kPa), millibar (mbar), inches of mercury (inHg), millimetres of mercury (mmHg), standard atmospheres (atm), a column height in feet and a column height in metres.

The converter works in both directions. Type in the inH₂O box to get psi.

PSI to Inches of Water Formula

The PSI to Inches of Water formula is inH₂O = psi × 27.6807, for water at 39.2 °F (4 °C).

inH₂O=psi×27.6807

The factor 27.6807 equals 1 psi (6,894.757 Pa) divided by 1 inH₂O (249.082 Pa). The pascal (Pa), named after Blaise Pascal, is the SI unit of pressure in ISO 80000-4. One inch of water is a hydrostatic pressure: the weight of a 1 inch (25.4 mm) water column pressing on its base.

h1 inρ = 999.97 kg/m³g = 9.80665 m/s²P on the baseP = ρ × g × h= 999.97 kg/m³ × 9.80665 m/s² × 0.0254 m= 249.08 Pa1 inH₂O = 249.08 Pa = 0.036127 psi
Hydrostatic pressure of 1 inch of water at 39.2 °F (4 °C)
39.2 °F / 4 °C× 27.68071 inH₂O = 249.082 Pa. The NIST standard.
60 °F / 15.6 °C× 27.70761 inH₂O = 248.84 Pa. US gas and HVAC.
68 °F / 20 °C× 27.72991 inH₂O = 248.64 Pa. Room-temperature lab.

Example: 0.5 psi × 27.6807 = 13.84 inH₂O (35.15 cm). The reverse formula is psi = inH₂O × 0.036127, so 13.84 inH₂O × 0.036127 = 0.5 psi.

The same formula links psi to 2 other units: 1 bar (100 kPa) = 401.47 inH₂O = 14.504 psi, and 1 inHg = 13.596 inH₂O.

PSI to Inches of Water Chart

The PSI to Inches of Water chart lists 35 pressures from 0.01 psi to 100 psi, with inH₂O at 3 reference temperatures, ftH₂O and kPa. Click a row to load the value into the calculator.

PSI to inches of water chart from 0 to 5 psi at 39.2 °F0501001502000123451 psi = 27.68 in2 psi = 55.36 in3 psi = 83.04 in4 psi = 110.72 in5 psi = 138.4 inPressure (psi)Water column (inH₂O)
PSI to inches of water conversion table
psiinH₂O at 4 °CinH₂O at 60 °FinH₂O at 68 °FftH₂OkPa
0.010.2770.2770.2770.02310.0689
0.0250.6920.6930.6930.05770.172
0.051.3841.3851.3860.1150.345
0.12.7682.7712.7730.2310.689
0.25.5365.5425.5460.4611.379
0.256.926.9276.9320.5771.724
0.38.3048.3128.3190.6922.068
0.411.07211.08311.0920.9232.758
0.513.8413.85413.8651.1533.447
0.616.60816.62516.6381.3844.137
0.719.37619.39519.4111.6154.826
0.7520.76120.78120.7971.735.171
0.822.14522.16622.1841.8455.516
127.68127.70827.732.3076.895
1.541.52141.56141.5953.4610.342
255.36155.41555.464.61313.79
2.569.20269.26969.3255.76717.237
383.04283.12383.196.9220.684
3.596.88296.97797.0558.07424.132
4110.723110.83110.929.22727.579
5138.403138.538138.64911.53434.474
6166.084166.246166.37913.8441.369
8221.445221.661221.83918.45455.158
10276.807277.076277.29923.06768.948
12332.168332.491332.75927.68182.737
14.696 (1 atm)406.795407.191407.51833.9101.325
15415.21415.614415.94834.601103.421
20553.613554.152554.59846.134137.895
25692.017692.69693.24757.668172.369
30830.42831.228831.89669.202206.843
401,107.2271,108.3041,109.19592.269275.79
501,384.0341,385.381,386.494115.336344.738
601,660.841,662.4561,663.793138.403413.685
802,214.4542,216.6072,218.39184.538551.581
1002,768.0672,770.7592,772.988230.672689.476

How to Convert Inches of Water Column to PSI

To convert inches of water column to PSI, divide the inches of water column (inWC) value by 27.6807.

  1. Read the inWC value7 inWCNatural gas supply pressure at an appliance
  2. Pick the factor27.6807Water at 39.2 °F (4 °C)
  3. Divide7 ÷ 27.6807 = 0.2529Result in psi
  4. Round and check0.253 psi1.744 kPa · 17.44 mbar

Low-pressure gas piping uses inWC in the National Fuel Gas Code, published by the American National Standards Institute (ANSI) as ANSI Z223.1 and by NFPA as NFPA 54. There are 4 common inWC values in gas work:

Gas pressure pointinWCpsikPa
Natural gas manifold (burner) pressure3.50.1260.872
Natural gas supply pressure70.2531.744
Propane (LP) supply pressure110.3972.740
Common appliance inlet maximum (½ psi)140.5063.487

How to Convert Inches of Water to PSI

To convert inches of water to PSI, multiply the inches of water value by 0.036127, which gives the same result as dividing by 27.6807.

Ruler from 0 to 28 inches of water with gas pressure points marked in psi; 27.68 inches equals 1 psi0 in4 in8 in12 in16 in20 in24 in28 in0.126 psi0.253 psi0.397 psi0.506 psi27.68 in = 1 psi
3.5, 7, 11 and 14 inches of water on the way to 1 psi

There are 3 ways to convert inches of water to psi:

  1. Multiply the inches of water value by 0.036127: 10 inH₂O × 0.036127 = 0.3613 psi.
  2. Divide the inches of water value by 27.6807: 10 ÷ 27.6807 = 0.3613 psi.
  3. Type the inches of water value into the inH₂O box of the calculator above.

1 inch of water equals 0.0361 psi, 249.08 Pa, 2.491 mbar and 0.0736 inHg.

How to Convert PSI to Inches of Water

To convert PSI to inches of water, multiply the psi value by 27.6807.

  1. Take the pressure in psi, for example 2 psi.
  2. Multiply by the factor for the reference temperature: 27.6807 at 39.2 °F, 27.7076 at 60 °F or 27.7299 at 68 °F.
  3. Read the result: 2 × 27.6807 = 55.36 inH₂O.
  4. Convert the height, if needed: 55.36 in ÷ 12 = 4.61 ft, or 55.36 in × 2.54 = 140.6 cm.
0.25 psi6.92 in (17.6 cm)
0.5 psi13.84 in (35.2 cm)
1 psi27.68 in (70.3 cm)
2 psi55.36 in (140.6 cm)

Match the pressure type on both sides of the conversion. There are 3 pressure types:

How Do You Convert Inches of Water Column to PSI

You convert inches of water column to PSI by reading the total water column height in inches and dividing that height by 27.6807.

U-tube manometer reading: the left leg drops 3.5 inches and the right leg rises 3.5 inches, a total of 7 inches of water column, which is 0.253 psizero7 in−3.5 in+3.5 inpressureopen7 ÷ 27.6807 = 0.253 psi

A U-tube manometer reading counts both legs. One leg drops 3.5 in and the other leg rises 3.5 in, so the reading is 7 inWC (0.253 psi), not 3.5 inWC. There are 3 common instruments for inWC readings:

  • U-tube manometers show the height difference between 2 legs of water.
  • Inclined manometers stretch a short height along a sloped scale for readings below 1 inWC, such as duct static pressure.
  • Differential pressure transmitters output inWC, Pa or psi on a digital display or a 4–20 mA signal.

Differential pressure flowmeters, including orifice plates and Pitot tubes, report readings in inWC. These flowmeters apply Bernoulli's principle, published by Daniel Bernoulli in Hydrodynamica (1738): flow rate rises with the square root of the pressure drop. HVAC designers working to ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers) guidance size duct fans in inWC. A duct static pressure of 0.5 inWC equals 0.0181 psi (124.5 Pa).

How Many Inches of Water to a PSI

There are 27.68 inches of water to a PSI at 39.2 °F (4 °C), equal to 2.307 ft, 70.31 cm or 703.1 mm of water column.

A 27.68 inch water column next to a 12 inch ruler: 1 psi of pressure holds up 2.31 feet of water0 in6 in12 in18 in24 in30 in27.68 in12 in1 ft ruler1 psi of water
Reference temperatureinH₂O per psicmH₂O per psi
39.2 °F (4 °C)27.680770.309
60 °F (15.6 °C)27.707670.377
68 °F (20 °C)27.729970.434

The spread between 39.2 °F and 68 °F is 0.049 in (1.25 mm) per psi. Atmospheric pressure at sea level, 14.696 psi, holds up 406.8 inH₂O (33.9 ft or 10.33 m) of water.

PSI to Inches of Water FAQ

How many inches of water is 1 PSI?

1 PSI is 27.68 inches of water (27.6807 inH₂O) at 39.2 °F (4 °C), equal to 2.307 ft or 70.31 cm of water column. 1 PSI is 27.71 inH₂O at 60 °F and 27.73 inH₂O at 68 °F (20 °C).

How to convert PSI to inches?

To convert PSI to inches of water, multiply the PSI value by 27.6807. 3 PSI × 27.6807 = 83.04 inH₂O (6.92 ft). To convert PSI to inches of mercury (inHg), multiply the PSI value by 2.036.

What is 5 PSI in inches of water column?

5 PSI is 138.40 inches of water column (138.4 inWC), equal to 11.53 ft (3.515 m) of water and 34.47 kPa.

What is 2 PSI in inches of water?

2 PSI is 55.36 inches of water, equal to 4.61 ft (1.406 m) of water and 13.79 kPa. Elevated-pressure natural gas systems run at 2 PSI and use a regulator to drop the pressure to 7 inWC (0.253 PSI) at each appliance.

More Pressure Calculators

Start from a different unit. Each calculator has its own live drawing, table and formula.