Inches of Water to PSI
Water tank and bottom gauge
linked to resultHow Inches of Water to PSI Calculator Works?
The Inches of Water to PSI calculator works in 4 steps: it reads the water column height in inches (inH₂O), converts the height to pascals (Pa), divides by 6,894.757 Pa per pound per square inch (psi), and draws a water tank with a pressure gauge at the bottom.
- Read the input40 inH₂OWater column height, gauge or differential
- Convert to pascals× 249.082 = 9,963.28 Pa1 inH₂O at 39.2 °F (4 °C), NIST SP 811
- Divide by 1 psi÷ 6,894.757 = 1.4451 psi1 psi = 6,894.757 Pa
- Draw the resultTank + bottom gaugeDepth: 3.333 ft · 1.016 m
Inches of Water to PSI Formula
The Inches of Water to PSI formula is psi = inH₂O × 0.036127, for water at 39.2 °F (4 °C).
Example: 40 inH₂O × 0.036127 = 1.445 psi. A furnace manifold set to 3.5 inH₂O sees 3.5 × 0.036127 = 0.126 psi.
Inches of Water to PSI Chart
The Inches of Water to PSI chart lists 37 water column heights from 0.5 inH₂O to 800 inH₂O with psi, kPa and mbar at the selected reference temperature (39.2 °F). Click a row to load the value into the calculator.
| inH₂O | psi | kPa | mbar |
|---|---|---|---|
| 0.5 | 0.0181 | 0.125 | 1.25 |
| 1 | 0.0361 | 0.249 | 2.49 |
| 2 | 0.0723 | 0.498 | 4.98 |
| 3 | 0.1084 | 0.747 | 7.47 |
| 3.5 | 0.1264 | 0.872 | 8.72 |
| 4 | 0.1445 | 0.996 | 9.96 |
| 5 | 0.1806 | 1.245 | 12.45 |
| 6 | 0.2168 | 1.494 | 14.94 |
| 7 | 0.2529 | 1.744 | 17.44 |
| 8 | 0.289 | 1.993 | 19.93 |
| 9 | 0.3251 | 2.242 | 22.42 |
| 10 | 0.3613 | 2.491 | 24.91 |
| 11 | 0.3974 | 2.74 | 27.4 |
| 12 | 0.4335 | 2.989 | 29.89 |
| 14 | 0.5058 | 3.487 | 34.87 |
| 20 | 0.7225 | 4.982 | 49.82 |
| 27.68 (≈ 1 psi) | 1 | 6.895 | 68.95 |
| 30 | 1.0838 | 7.472 | 74.72 |
| 32 | 1.156 | 7.971 | 79.71 |
| 40 | 1.4451 | 9.963 | 99.63 |
| 41 | 1.4812 | 10.212 | 102.12 |
| 42 | 1.5173 | 10.461 | 104.61 |
| 48 | 1.7341 | 11.956 | 119.56 |
| 54 | 1.9508 | 13.45 | 134.5 |
| 55 | 1.9869 | 13.7 | 137 |
| 56 | 2.0231 | 13.949 | 139.49 |
| 64 | 2.3121 | 15.941 | 159.41 |
| 65 | 2.3482 | 16.19 | 161.9 |
| 80 | 2.8901 | 19.927 | 199.27 |
| 84 | 3.0346 | 20.923 | 209.23 |
| 95 | 3.432 | 23.663 | 236.63 |
| 100 | 3.6126 | 24.908 | 249.08 |
| 200 | 7.2253 | 49.816 | 498.16 |
| 400 | 14.4505 | 99.633 | 996.33 |
| 406.8 (≈ 1 atm) | 14.6962 | 101.327 | 1,013.27 |
| 600 | 21.6758 | 149.449 | 1,494.49 |
| 800 | 28.901 | 199.266 | 1,992.66 |
Inches of water to psi on the job
The tank above shows the idea behind the unit. The deeper the water, the harder it presses on the floor. Every inch of depth adds 0.0361 psi.
- Manometer readings: read the height gap between the two legs of a U-tube in inches, then convert. A 4 inch gap is 0.1445 psi.
- Inches of water gauge (inWG): the same unit, measured against room air. Convert it the same way to get psig.
- Vacuum: enter a negative value. 48 inches of water vacuum is 1.734 psi below atmosphere.
- Water head: tank and pipe pressure from a standing column. 1 ft of head is 0.4335 psi.
Inches of Water to PSI FAQ
How do I convert inches of water to psi?
To convert inches of water to psi, multiply the inches of water value by 0.036127, or divide by 27.6807. 40 inH₂O × 0.036127 = 1.445 psi (9.963 kPa).
What is 1 inch of water in psi?
1 inch of water is 0.036127 psi (249.08 Pa or 2.491 mbar) at 39.2 °F (4 °C). It takes 27.68 inches of water to make 1 psi.
How do I convert inches of water gauge to psi?
To convert inches of water gauge to psi, divide the inches of water gauge (inWG) value by 27.6807. Inches of water gauge, inches of water column (inWC) and inH₂O name 1 unit, measured against the surrounding air. 8 inWG ÷ 27.6807 = 0.289 psig.
How do I convert a manometer reading in inches of water to psi?
To convert a manometer reading to psi, add the rise of one leg to the drop of the other leg and divide the total by 27.6807. A U-tube manometer with legs at +2 in and −2 in reads 4 inH₂O, which equals 0.1445 psi.
How do I convert inches of water vacuum to psi?
To convert inches of water vacuum to psi, divide the vacuum reading by 27.6807 and mark the result as negative gauge pressure. 10 inches of water vacuum equals −0.361 psig, which is 0.361 psi below atmospheric pressure.
What is inches of water head in psi?
Every inch of water head adds 0.0361 psi at the bottom of a water column, and every foot of head adds 0.4335 psi. A 10 ft (3.05 m) tank full of water puts 4.34 psi (29.9 kPa) on the tank floor.
Is inches of water to psi the same at every temperature?
No, the inches of water to psi result changes by up to 0.18% between reference temperatures. 1 inH₂O equals 0.036127 psi at 39.2 °F, 0.036091 psi at 60 °F and 0.036062 psi at 68 °F (20 °C).